S-BOARD This smart clip-on front mudguard is for road, cyclocross, hybrid, gravel bikes, etc. Suited for maximum tire width up to 38mm, it is the ideal companion to our S-BLADE rear mudguard. Its smart, double-hinged, quick-release fitting system also fits aero forks. Paintwork protection film for the frame is included. S-BLADE The S-BLADE is the little brother of our top-selling X-TRA-DRY for the ambitious racing cyclist. With our quick-release mounting, the S-BLADE can be fitted on virtually any racing bike, and the angle setting can be optimally adjusted. - Weight: 206g - Wheel size: 650B – 28-inch - Tire width: 30 – 38mm - Length front fender: 390mm - Length rear fender: 465mm

The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible

Turn your mountain bike into an all-weather vehicle with Planet Bike's Cascadia Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

The Grunge Rear seat post mounted fender is designed with an 85mm wide profile to shield your rear end from spray, mud and crud. It'll keep you clean on your commute or when ripping around on singletrack. - Durable all-weather polypropylene blade - Quick release seatpost mount attaches and removes in a snap - Features fender angle adjustability to fit most bikes and dial in spray protection - Eyelets Required?: No - Wheel size: 24", 26", 650b, 29" and 700c - Fender width: 85mm wide x 460mm long - Max tire width: 2.25" - Weight: 174 grams

- Attaches to saddle rails - Quick and easy to install and remove - Fat Butt, a wider version for fatbike applications - Road/CX narrower for road and cross bike applications

A pair of Electra's Townie Aluminum Fenders on your ride will let you pedal even in less-than-ideal conditions. They're made from durable, low-maintenance aluminum and offer full coverage so you'll arrive squeaky clean. All mounting hardware is included for quick and easy installation.

Ride in any weather The Bontrager NCS fender is everything you want in a fender. It installs in seconds, is available in a variety of sizes to fit various bikes, and offers full coverage to keep you dry. The no-cut design includes everything you need for easy installation and it even comes with an integrated Blendr rear light mount. Product details - Fully assembled fenders that install in minutes - Integrated rear Blendr light mount for use with Bontrager Flare lights - No-cut struts allow quick strut adjustment for proper tire clearance - Double-back strut on rear fender adds support and stability - Made of lightweight yet super-durable polycarbonate - Stainless steel hardware resists rust - Four sizes available to accommodate most bike and tire configurations

These steel fenders offer tire coverage that is durable with a timeless aesthetic. - The crescent full-coverage design offers a closer fit around the tire - Made in the USA

Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 57.5cm / 22.6" (in length) - Weight: 75g / 2.65

Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube - Two tone injected high impact resistant plastic - Weight: 233 grams - Rear angle adjustable - 73x21x11cm/28.7x8.3x4.3-inch

Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube (FX); QR seatpost attachment (RX) - Two tone injected high impact resistant plastic - Weight: 233 grams (FX); 226 grams (RX) - Rear angle adjustable - Size: 73 x 21 x 11 / 28.7” x 8.3” 4.3” (Front); 61 x 18 x 10 / 24” x 7.1” x 3.9” (Rear)

Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.

Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - Clamp Diameter: Universal, endless strap type - Quick release allows DeFender to be installed and removed in seconds - Rear angle adjustable - Injected molded nylon - Dimensions (L x W x H): 22 x 4 x 6" - Weight: 226 grams

Topeak's DeFender XC1 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. Extra clearance makes it perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

Designed specifically for commuters, this 45mm wide front and rear fender set is the perfect option for the every day rider. The reflective strips that run down either side of the fenders provides enhanced visibility. - Sturdy stainless steel double stays - Easily mounted with included hardware

Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.

Keep water and mud at bay with SKS's Dashblade fender! It's light and easy to install and remove thanks to its quick-release strap that fits a wide variety of seatposts and seat tubes.

Keep water and mud at bay with SKS's Dashboard fender! It's light and easy to install and remove. Plus, it works with most rigid and suspension forks.

Mudguard in pure form: EDGE AL guarantees city and trekking cyclists ideal splash protection on the road. This aluminum mudguard mounts close to the tire and offers great stability, although it is only attached at three points. No load rack is necessary to attach EDGE AL. With a purist matte-black look and an angular profile, EDGE AL integrates itself almost invisibly into the frame. - Urban fender set - Sturdy aluminum profile design for urban bikes - Black U-stay - Includes accessory parts and stays - Weight: 568g

- Color: Black - Maximum Tire Width: 35 mm - Fender Width: 45 mm - Wheel Size: 700c - Material: Aluminum - Requires Eyelets?: Yes

The ultimate set of mudguards for fat tire bikes offering all-round mud protection. Front is mounted easily under the down tube by high-performance straps and the rear fits to the seat post in seconds with the proven tool-free SKS quick-release Powerstrap attachment system. The two-hinge arm in the rear allows perfect adjustability to the geometry of your bike.

This super-lightweight (45g) and discreet mudguard protects your face (and your fork seals) from mud and water. Made of super-soft material, it fits 26", 27.5", and 29" bikes and is compatible with most forks. Thanks to the included zip ties that wrap around the fork bridge and fork legs, the Flapguard sticks close to your bike even during extremely aggressive riding. - Also compatible on rear side of frame

Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.

The Mudrocker Rear Extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. This item is included with the Mudrocker Rear Fender, but we offer it here as a replacement. - Made in Germany