Shimano SM-BH90 disc brake hose and hose kits offer solutions for your brake hose and connection requirements. OEM hose kit for Dura-Ace BR-R9170 disc brakes

Cable is coated with a durable low-friction polymer. - Dupont Tefzel coating is more durable than previous coated cables - Length: 2300mm - Diameter: 1.2 - Cable Head: Shimano/SRAM - Double Ended: No

- Great for center-pull cantilever brake setups - Fits threadless fork steerer tubes - Includes barrel adjuster - 24mm cable stop drop - AL6061-T6 alloy construction

- Combination straddle cable and hanger - Includes knarp

Jagwire's Tube Tops are installed over your cable housing sections to provide a soft bumper to deaden the impact of cables hitting your frame while riding, minimizing rattles and protecting your frame's fine finish. They feature a split seam so they're easy to install by hand with no cable disassembly required. Just open the Tube Top's seam, put it on the housing where it's rubbing the frame, rotate the seam so it faces out and release. The Tube Top will stay in place and keep your bike quiet and safe.

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.

Mountain Pro kits offer both enhanced performance and style. But unlike Road Pro Kits, shift and brake systems are sold separately. Teflon-coated cables used with our Slick-Lube liners dramatically reduce friction while Kevlar-reinforced, compressionless brake housing delivers smooth, powerful braking performance. And, with all the needed parts included, our Mountain Pro kits are easy to install. - Teflon-coated cables, Slick-Lube liners, and Kevlar-reinforced, compressionless brake housing enhance performance - Designed to keep gunk out - enough housing for continuous runs, including seal liners if a bike has stops - A step above standard OEM cables and housing - Appearance options from classic to colorful Specs: - Housing Construction: KEB with Slick-Lube Liner - Outside Diameter: 5.0mm - Housing Length: 3000mm - Cable Construction: TEC-ST - Compatibility: SRAM/Shimano Mountain - Front Cable Length: 1350mm - Rear Cable Length: 2350mm What's Included: 1 3000mm KEB-SL Kevlar-Reinforced Brake Housing 1 1350mm Teflon-Coated Front Brake Inner Cable 1 2350mm Teflon-Coated Rear Brake Inner Cable 4 Lined Alloy End Caps 2 POP Alloy End Caps 2 Cable Tips 2 4G Tube Tops 3 Cable Donuts 2 Rotating Hooks 1 650mm Sealing Liner

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. - Allow the easy installation of Jagwire hose with Shimano disc brakes - Kits contain enough hardware for both front and rear brakes - Requires Jagwire Mountain Pro Universal Disc Brake Hose Kit for installation Compatibility - HFA312: Shimano XTR M975, Deore XT M775, SLX M665, LX T665 and M585, Hone M601, Deore T615, M595, M535 and M525, Alfine S500 and S501, Metrea U5000, Alivio M4050, Acera M3050, and Non-Series T605, MT500, M575, M486, M485, M446, M445, M395, M365, and M355 - HFA314: Shimano Dura Ace R9120, R9170, R9180 and Ultegra R8020, R8070

The Jagwire Pro Shift kit is a great way to upgrade from OEM cables and housing. Slick polished cables reduce friction and deliver long lasting performance, and continuously lubricated Slick-Lube liners provide precise cable movement. - Pro Slick Polished inner cables reduce friction and have no coating to wear off - Continuously lubricated LEX-SL linear-strand provides consistent, compressionless performance - Inner cables, housing, and small parts necessary for installation on a road or mountain bike are included - Includes longer cables and extra housing for compatibility with most large frames and bikes with continuous housing - Available in a wide range of colors to match Jagwire Pro Brake and Hydraulic Hose kits - Single-ended SRAM/Shimano compatible cable ends are weld-cut for easy installation

Road Pro Brake kits offer enhanced performance and style. Designed to work with and match Jagwire's Pro Shift kits, the Pro polished brake cables combined with their Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Road Pro Brake kits are easy to install. - Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance - All parts needed for a complete brake cable and housing install on road bikes are included - Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes

Road Pro kits deliver enhanced performance and style. Teflon-coated cables used with our Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all the needed parts included, our Road Pro kits are easy to install. - Teflon-coated cables, Slick-Lube liners, and Kevlar reinforced, compressionless brake housing enhance performance - All parts needed for a complete brake and shift cable/housing install are included - A step above standard OEM cables and housing - Appearance options from classic to colorful What's Included: 1 1700mm LEX-SL Shift Housing 2 2300mm Teflon-Coated Shift Inner Cables 4 Lined Shift Alloy End Caps 1 Sealed Shift Alloy End Cap 1 Hooded Shift Alloy End Cap 2 Shift Cable Tips 1 1700mm KEB-SL Kevlar-Reinforced Brake Housing 1 850mm Teflon-Coated Front Brake Inner Cable 1 1650mm Teflon-Coated Rear Brake Inner Cable 2 Open Brake Alloy End Caps 2 Lined Brake Alloy End Caps 2 POP Alloy End Caps 2 Brake Cable Tips 4 Mini Tube Tops 9 Cable Donuts 3 Rotating Hooks 2 EZ-Bend Housing Segments

Jagwire Sport Mineral Hydraulic Hose Kits feature a durable, flexible reinforced layer surrounding a low-friction inner tubing to deliver light brake lever action and trustworthy braking power. Offered as single hose kits for individual brakes or in bulk boxes for workshop use, Sport Mineral Hydraulic Hose is available for most popular road and mountain hydraulic disc brake systems that use mineral oil brake fluid. - High performance hydraulic hose provides effective braking power and control - Kits include hose and necessary fittings for one brake lever and caliper system - Contains 2000mm HPP hydraulic hose, needle insert, compression bushing, compression nut and seals for the listed compatible brake models - Compatible with Shimano Dura Ace (R9120, R9170), Ultegra (R8020, R8070), 105 (R7070), GRX (RX810, RX400), and similar brakes - For use with mineral oil brake systems only

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

Frame-mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10

Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.

Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

- Alloy cable ends - For 1.2mm to 1.6mm cables - Silver

Rejuvenate the performance of your road brakes with this convenient and valuable cable. - Rejuvenate the performance of your brakes with this convenient and valuable cable - Extra-long 2750mm length ensures fitment for any application - Compatible with road brake systems - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap - Diameter: 1.5mm

Rejuvenate the performance of your drivetrain with this convenient and valuable cable. - Rejuvenate the performance of your drivetrain with this convenient and valuable cable. - Extra-long 3100mm length ensures fitment for any application - Compatible with Shimano and SRAM drivetrains - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap - Diameter: 1.1mm

Precision-machined 4mm ID silver aluminum cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables. - Inside diameter: 4mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs

Precision-machined 5mm ID silver aluminum cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables. - Inside diameter: 5mm - Outside diameter: 5.75mm - Overall length: 12.7mm - Material: aluminum - Bottle of 50pcs

Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

Genuine replacement parts All the parts you need to keep your Boone fresh. For proper assembly. - For 2014-2018 Boone - For specific compatibility concerns, please contact our Customer Service team

Genuine replacement parts Keep your bike safe and operating as it should. Keeps your cables and housing under control. - Replaces any 5mm X 28.6mm headset spacer to improve cable housing management - Compatible with threadless forks only

Genuine replacement parts Original Trek Fetch+ 4 cable guides Original Fetch+ 4 repair part - Set of 2 cable guides (Left + Right) - To guide cables around the steerer tube

Genuine replacement parts For optimal functionality. Replacement steer cable mount for your cargo bike. - Mounts front brake cable - Fastener kit not included

Genuine replacement parts For proper assembly. For optimal integration. - 10 pack - For 22.2 - 31.8mm handlebars

Genuine replacement parts Securely holds hub motor power cable in place. Original equipment replacement parts for your ride. - See your bike's specific product page for compatibility - Includes mounting hardware

Get your cables under control. - Designed for use on Top Fuel 29 2020-2021 - Reversible to meet cable routing differences in Rock Shox vs. Fox shocks

For proper assembly. - Compatible with 2015-2017 Emonda SLR - Trek cable stops and guides

For proper assembly. - Original equipment replacement downtube covers for Trek Madone 9 Series frames - Not compatible with other bikes

Hydraulic hose with banjo fitting for TRP brakes.

Hydraulic hose with banjo fitting for TRP brakes.

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- MTB or Road - Stainless steel - 1.5mm diameter - 2000mm length

- Galvanized steel inner wire - Standard 5mm brake housing - Front or Rear

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Replacement link wire for cantilever brakes

- 50 feet (15.2 meters) length - 5mm diameter cable housing - For brake cables

- Flexible linear pull brake guide - Guides cable to brake arm - Bag of 10

- MTB or Road - 1.5 x 1855mm - Galvanized

- MTB or Road - 1.5 x 2667mm - Galvanized

- Galvanized steel inner wire - Standard 5mm S.I.S. housing - Front or Rear - Mountain or road

- 50 feet (15.2 meters) length - 5mm diameter brake cable housing

- Routes cables underneath the bottom bracket - Will not rust or corrode

- Use: Brake - Length: 30mm - Diameter: 5mm

Shifting cables for Road/Mountain bikes.

- Multi-strand construction - Length: 25 feet - Size: 4mm

- Multi-strand construction - Length: 25 feet - Size: 5mm

- Use: S.I.S. - Length: 30mm

- Galvanized steel inner wire - PTFE lined brake housing - Front or Rear - Mountain or road

- Stainless steel shifter cable - PTFE-coated for reduced friction - Length: 2000mm - 1.1mm compatible with Shimano, SRAM, and Campagnolo shifters - 1.2mm compatible with Shimano and SRAM shifters

- For mountain bike cable-actuated brakes - 1.5mm x 3000mm - Stainless steel

- Replacement front cable hanger - Steel construction - Includes barrel adjuster - Steerer Diameter: 25.4mm

- Fits cantilever brakes - Sold individually

- Complete cable kits for internal three-speed hubs