Write Us a Review!

Columbia ShopIrmo Shop

Bicycles require regular maintenance to perform reliably. If you don't want your bike to strand you on the road, you must keep it in good condition.

Outspokin’ Bicycles’ team of service technicians are always happy to look over your bike to advise you of any maintenance and/or repairs that will put you safely and comfortably back on the road.

The following list of necessary maintenance items and recommended frequency of maintenance is designed to give a recreational cyclist or a commuter an outline for a schedule. If you often ride in rain and mud, or who put on very high weekly mileage, you will need to perform routine maintenance more often to keep your bikes in peak condition. And for those of you who fall in the low mileage range, this time schedule can be followed a bit more loosely. It’s always a good idea to have your bike looked over by a professional if it’s been many months since your last ride.

Keep Your Bike In Great Shape!

Before every ride:

  • Check tire air pressure.
  • Check brakes and cables.
  • Be sure your crank set is tight.
  • Be sure quick release hubs are tight, but not too tight.

After every ride:

  • Inspect tires for glass, gravel shards, and cuts on tread and sidewall.
  • Check wheels for true.
  • Clean the bike's mechanical parts as necessary.

Once a week or every 200 miles:

Lubricate chain (with dry lube; or every other week or 400 miles with wet chain lube)

Once a month:

  • Completely clean the bike, including the drivetrain if necessary.
  • Inspect chain and freewheel. Measure the chain for wear, check for tight links and replace the chain if necessary.
  • Inspect and lubricate brake levers, derailleurs and all cables.
  • Inspect pedals and lubricate SPD style cleats.
  • Inspect and check for looseness in the:
    • stem binder bolt
    • handlebar binder bolt
    • seatpost binder bolt (or quick release)
    • seat fixing bolt
    • crank bolts
    • chainring bolts
    • derailleur mounting bolts
    • bottle cage bolts
    • rack mounting bolts (use thread lock on these)
    • brake and derailleur cable anchors
    • brake and shifter lever mounting bolts
    • brake mounting bolts (do not alter brake centering)
  • Inspect tires for wear; rotate or replace if needed.

Every three months:

  • Wax bike. A clean, shiny bike always seems to go faster and farther.
  • Inspect frame and fork for paint cracks or bulges that may indicate frame or part damage; pay particular attention to all frame joints.
  • Visually inspect for bent components: seat rails, seat post, stem. handlebars, chainrings, crankarms, brake calipers and brake levers.

Every six months:

  • Inspect and readjust bearings in headset, hubs, pedals and bottom bracket (if possible; some sealed cartridge bearings cannot be adjusted, only replaced)


  • Disassemble and overhaul; replace all bearings (if possible); and remove and if necessary replace all brake and shift cables. This should be performed at 6000 miles if you ride more than that per year. Commuters who often ride in the rain or mountain bikers who get dirty should overhaul their bicycles more often.
  • Before any important journey it's a good idea to have a professional double check all adjustments so no problem spoils your great ride.

Never hesitate to ask us for advice about the care of your bike.

And remember: you receive lifetime tuneups with any new bike purchased from Outspokin’ Bicycles. So, take advantage of this offer and let us help keep your bike in its optimum condition!